AV&V™ Solid Carbide Valve Guide Reamers
Specially designed by AV&V™ for use with manganese bronze material, these unique self centering reamers feature a unique design with a long pilot for a perfect alignment with the valve guide while reaming.
- Do not use with cast iron guides
- You will ream a valve guide to exact dimension without any taper in 4 to 5 seconds only.
- Guides will last longer than with the honing method because there is no crosshatch left after reaming.
- One size allows you to fit both intake & exhaust if you use AV&V valves & guides.
AV&V™ Valve Seat Inserts
AV&V™ valve seats are made from a highly alloyed material and feature the following :
- Easy oversize identification by the part number
- Easy to machine with cutter and stone
- Resists severe pounding and dissipates heat better
- Work-hardens during running-in
- Radiused for easier installation
AV&V™ Valve Seal Drivers
AV&V™ valve Seal Drivers are made from aluminium and feature the following :
- Allows easier and more precise installation of both O.E. or viton valve seals.
- Valve seal is installed in centerline with the guide.
- Prevent costly comeback caused by a loose seal.
- Radiused for easier installation